AAC CONCRETE LIGHT BRICK'S RAW MATERIAL PREPARATION & PLACEMENT
Jakarta, Sunday 2 August 2020
AAC CONCRETE LIGHT BRICK’S RAW
MATERIAL PREPARATION & PLACEMENT
To : Ladies & Gentlemen as prospective
investors in Indonesia for AAC light concrete brick factory.
Here is a short review Number 9, about whether it
is the AAC lightweight concrete brick. My review; Ibrahim, made by the talks
with Mr. Wang, a Bachelor of Chemical engineering from China. Also from the
reference/book of the technique of making AAC lightweight concrete brick in
China. I combine with my Lecturing experience in P2M U.I. Machine Engine
Faculty, Salemba, Jakarta.
1 Preparation and storage of
raw materials. In the production of aerated concrete, siliceous materials such
as Sand, Fly Ash, etc. are first ground. Among them, according to the
requirements of raw materials and process characteristics, some are dry-milled
into powder, and some are wet-milled to make Slurry. And mixed with a part of Lime. There are two methods of mixing: one is Dry
mixing to prepare cement; the other is wet grinding with water, mainly to
improve the characteristics of Fly Ash or and Sand, called Hydrothermal Ball Milling. Most of the Lime purchased by people is in Block
form, so Lime must also be crushed and ground. Gypsum is generally not ground
separately, or mixed with Fly Ash (Sand) and ground together, or mixed with Lime. A ball Mill is used with the Lime wheel, and
other auxiliary materials and chemicals are often used in the system.
The storage of raw materials is
mainly to ensure the continuity of production and the stability of raw
materials. The continuity is to meet the requirements of the production cycle.
The stability is mainly to realize the reasonable cooperation of raw materials
of different sources and quality through storage to meet the process
requirements. Or make the raw materials
stable through storage, such as freshly burned quicklime, because the internal
chemical reaction has not been completely finished, at this time, it is used
for washing, it is very easy to destroy the pouring stability, and after a
certain period of storage, it can make it completely react; or The homogenization of raw materials is
realized through storage, such as Lime from crushing, grinding to ingredients,
usually through Secondary Silos storage, and at the same time, it also
completes the secondary conical stacking and unwinding functions, thus
realizing Material homogenization. The
raw material preparation and storage process is the preparation process of the
ingredients. It is the reprocessing of the raw materials to meet the
technological requirements and the preparation before the completion of the
ingredients. The Homogenization and aging processes directly affect the smooth
progress of the entire production process.
Whether the product quality can meet the most basic process
requirements.
For a face-to-face consultation on investing,
please contact HP IBRAHIM 082252755689 We offer an
Investment Package of Rp50 Billion with R.O.I. 22 months.
Thank you and sincerely;
Best Regards,
Ibrahim
Komentar
Posting Komentar